Agpro, Inc.’s Ditch Covers

DitchCoversEngineered to support animal or farm vehicle traffic when in the lowered position, these handy covers are available in pneumatic or manually operated models. Styles include units for acceptance of flush from one or both directions. Fixed position models complete the product line with standard lengths of 10′, 12′ and 14′. (Special lengths available on request).
Check Out These Features

– Flush mounted with adjoining concrete when lowered to permit emergency scrape cleaning.
– Hot dip galvanized frames for extended service life.
– Eliminates plugging and seal over problems found with conventional bar or pipe grate covers.
– Non – slip diamond plate covers to prevent injury to animals.

2-13-08-1 134

Agpro, Inc. Air Operated Ditch Covers are flush mounted with adjoining concrete surfaces when in the down position. This will permit normal animal and/or vehicle traffic without obstruction. Immediately prior to flush cleaning, the ditch cover is actuated to raise approximately 6 inches and accept the flush. Pneumatic control is sold separately.

Frame is of heavy duty steel construction. Cover is of raised diamond floor plate. Hot dip galvanized frame with primed lid. Width 2 foot nominal. Length 10 feet through 14 feet nominal in 2 foot intervals. “VR” denotes vertical rise or flush acceptance from two directions. “H” denotes hinged for flush acceptance from a single direction.

DC-10A-VR (2″ X 10’/ 560 lbs) part no. 834-00-001
DC-12A-VR (2′ X 12′ / 670 lbs) part no. 834-00-002
DC-14A-VR (2′ X 14′ / 780 lbs) part no. 834-00-003
DC-10A-H (2′ X 10′ / 560 lbs) part no. 834-00-010
DC-12A-H (2′ X 12′ / 670 lbs) part no. 834-00-011
DC-14A-H (2′ X 14′ / 780 lbs) part no. 834-00-012

Call (903) 785-5531 or e-mail info@AgproUSA.com for more information.

See also ditch cover controller (sold separately)…

831-00-080 SF-CONT-M controller pic

Agpro, Inc.’s Manually Operated Ditch Covers are flush mounted with adjoining concrete surfaces when in the down position. This will permit normal animal and/or vehicle traffic without obstruction. Hinged below the lid, the front raises approximately six inches to accept the flush. Manual operation may be from either end.

Frame is of heavy duty steel construction. Cover is of raised diamond floor plate. Hot dip galvanized frame with primed lid. Width 2 foot nominal. Length 10 feet through 14 feet nominal in 2 foot intervals.

DC-10M (2′ X 10′ / 560 lbs) part no. 834-00-004
DC-12M (2′ X 12′ / 670 lbs) part no. 834-00-005
DC-14M (2′ X 14′ / 780 lbs) part no. 834-00-006

Agpro, Inc.’s Pro-Vee Concrete Floor Grooving Tool

The Pro-Vee Grooving Tool is specially designed to quickly groove dairy cattle floors during placement in one pass. The unique V shape permits formation of a consistent groove with no rocks or burrs protruding after the float passes. The Pro-Vee Groover is built to efficiently provide uniform, nonslip floor grooves for cattle walkways.These finishing tools are all high quality magnesium or aluminum, designed to keep weight to a minimum.Easily remove the Pro-Vee tool in minutes to allow the float to be used for non-grooved surfaces.Sold as a set or as individual parts. The tool is designed to fit a standard 8″ wide bull float with 1/2″ tall edges. Set Includes: 10 Pro-Vee Grooving Tools 4 foot Bull Float Two Part Handle that connects for extended reach

Agpro, Inc.’s Pro-Vee Concrete Floor Grooving Tool is sold as a set or individual parts as needed

Complete Set
Pro-Vee Floor Groover
(999-01-091)

Bull Float and Handles
(999-01-057)

Pro-Vee Floor Grooving Tools – Set of 10
(999-01-090)

One Pro-Vee Floor Grooving Tool
(999-01-056)

Agpro, Inc.’s Tip Type Waterer

Tip Type Waterers by Agpro,®Inc.
Fresh Drinking Water at a Touch!

Readily available clean water for animals improves herd health and boosts production. Use as a means to flush clean areas that cannot be reached by conventional cleaning methods. Sized to allow several animals to drink simultaneously.
Check Out These Features

Easy to clean providing a more sanitary operation and “instant” fresh water.
Available in 6, 8,10 or 12 foot models to fit your specific needs.
Standard hot dip galvanized or special order all stainless steel finish for years of trouble free service.
Includes anti-siphon water level control valve (freeze proof configurations available)
Unique “off-center” pivot allow easy dumping while weight of water prevents unintentional dumping by animals.
** Plastic liner in the video is an option.

Call (903) 785-5531 or e-mail info@AgproUSA.com for more information.