Agpro Pro Timer DJ400 Programming (Controls two Deck Jet Pumps)

PROGRAMMING YOUR TIMER SETTINGS

Print
Control Box
Control Box 2
No. 1 – Fuse
No. 2 – Lockable Latch
No. 3 – Power Entry
No. 4 – Set High Digits
No. 5 – Set Low Digits
No. 6 – Hand Operate
No. 7 – Sub-Mode Select
No. 8 – Mode Select

dJ400

Controls two Deck Jet pumps
At input a low water switch is provided.
A fault will cause alarms and automatic shutdown of the Deck Jet system.

Spray Times

Modes

SP-

Sub Modes

SP1 Spray 1 – OFF time

SP2 Spray 1 – ON time

SP3 Spray 2 – OFF time

SP4 Spray 2 – ON time

SP5 Interval

Set First Digit

Set Time, Seconds – 5 (1 to 30)

Set Time, Seconds – 1 5 (1 to 30)

Set Time, Seconds – 5 (1 to 30)

Set Time, Seconds – 15 (1 to 30)

Spray Interval – 1 (1 to 30) 1 is every time

Set Last Digits

Hand Operate

Modes

HOP

Sub Modes

HO-

Set First Digit

Select 1 or 2

Set Last Digits

Operate

Modes

OP-

Sub Modes

OPS

Set First Digit

Set output number 1-4 Makes outputs active

Set Last Digits

1 = Operate / 0 = OFF Active outputs are lit
After 4 seconds display changes to dJ0, when deck jet 1 is started the display changes to dJ1 and the number of seconds run is shown.  When deck jet 2 is started the display will change to dJ2.

Turn Deck Jet System OFF

Modes

OFF

Sub Modes

Set First Digit

Set Last Digits