Agpro, Inc. Automatic and Manual Controllers

Control Ditch Covers

Agpro, Inc. Ditch Cover Controllers are sold separately and are engineered for air operated ditch covers.

Installation Instructions…

Control Deck Jet Systems

Controls 2 Deck Jet Pumps
Installation Instructions…

Control Flush Valves

Flush Valve Controller

Features:
Automatically Monitors Temperature and Humidity
Healthier Cows
Less Water Usage
More Milk$$$

Mounts Outside, in Weather Tight Enclosure
Monitors Temperature.
Monitors Humidity.
Programmable Set Points to:
Start Fans,
Set Soak Time and
Set Dry Time
Pause Button Stops Fans and Soakers When Cows are Milking.

The diagrams below illustrate the differences between a typical standard controller’s soak time and the dry time compared to the Agpro FS400 automatic cow cooling controller. Typically a temperature switch activates a repeat cycle timer (at 72 degrees) that turns on the soaker for 3 minutes and turns off the soaker for 12 minutes. (See red curves below.) The Agpro controller monitors both temperature and humidity. The soak time varies from 1 minute to 4 minutes based on temperature. The dry time varies from 4 minutes to 20 minutes depending on the humidity. This results in a more efficient use of water and the ability for the controller to adjust amount of cooling based on weather conditions.

Parlor Flush Valve Controller
Installation Instructions…

Features:
Healthier Cows
Less Water Usage
More Milk$$$

Mounts Outside, in Weather Tight Enclosure, Near Flush Valve.
Eliminate Costly Trenching.
Eliminate Costly Wiring.
Full Featured programming: You set how often and what times of the day or night you want to flush
Manual start, sequenced flushing is also available using Agpro, Inc.’s External Button sold separately
Temperature Range: -40 to 120 deg F (-40 C to 48.8889 C)

The flush valve controllers are to be mounted near the flush valves. Each flush valve will operate up to 12 times a day. The user will program the flush time, duration and days to flush. The flushing time can be any time day or night and can be programmed to flush in sequence.

Control Wash Pen Systems

Wash Pen Controllers
Installation Instructions…

An Intelligent Control of Your Wash Pen, wash cows on a preset sequence after a single button push:

Cleaner Cows
Less Water Usage
More Milk$$$

Mounts in parllor, in Weather Tight Enclosure.
Eliminate Costly Wiring.
Temperature Range, -40 to 120 deg F.

Models:

Agpro Pro Timer WP 100— Controls 1 Wash Pen Pump
Agpro Pro Timer WP 200— Controls 1 Washpen Pump, Plus 1 Chemcal pump

Agpro manufactures a digital programmable automatic wash pen controller that allows dairy men full control of their wash pen. a single button push activates a predetermined timing sequence. Control of both a wash pen pump and an optional chemical metering pump are available. Start sequence uses a reliable water proof air button. An emergency stop button is also available. A water proof enclosure houses the controller.

Features

The controller will turn on and off up to 2 pumps.
Manual washing is available using provided air button.
The controller will keep and display the ‘on’ time each day for each pump.

Wash Pen Controllers
Installation Instructions…

An Intelligent Control of Your Wash Pen, wash cows on a preset sequence after a single button push:

Cleaner Cows
Less Water Usage
More Milk$$$

Mounts in parllor, in Weather Tight Enclosure.
Eliminate Costly Wiring.
Temperature Range, -40 to 120 deg F.

Models:

Agpro Pro Timer WP 100— Controls 1 Wash Pen Pump
Agpro Pro Timer WP 200— Controls 1 Washpen Pump, Plus 1 Chemcal pump

Agpro manufactures a digital programmable automatic wash pen controller that allows dairy men full control of their wash pen. a single button push activates a predetermined timing sequence. Control of both a wash pen pump and an optional chemical metering pump are available. Start sequence uses a reliable water proof air button. An emergency stop button is also available. A water proof enclosure houses the controller.

Features

The controller will turn on and off up to 2 pumps.
Manual washing is available using provided air button.
The controller will keep and display the ‘on’ time each day for each pump.