Manure Separators by Agpro^®
A full line of separation solutions!

Image 1 - Twin Mark 5 separators and a stacker in a v configuration.
Image 2 - Twin Mark 5 Separators in similiar configuration with a stacker.
Image 3 - Dual Separators in side-by-side configuration.

Where there's a problem, there is a solution. More stringent regulations and permit requirements make waste management a top concern at dairies and other livestock operations. Agpro^® Inc. is the solution. We have the tools to analyze, design, manufacture, sell, install and service the most complete selection of manure separations systems in the industry.

As regulations get tougher, so do separation systems from Agpro^® Inc. We're able to remove more solids and phosphorous than ever. No matter what type of bedding, feed or housing conditions are present, separator systems from Agpro^® Inc. can be configured or modified to help achieve ultimate performance that will give any inspector or regulator a "clear" idea of your waste management program. 

We have the Separation Solutions^TM you want: patented designs; ultra-fine double screening or standard single-screen systems; static-screen, conveyor and screw-press designs; models in multiple shapes and sizes to fit existing spaces and specific needs; removable screens and stationary spray nozzles for easy cleaning; stainless steel and hot-dipped galvanized construction. The list goes on. Of course, the Agpro^® Inc. equipment line also includes flush valves, towers, augers and a range of pumps and accessories. 

Click to view Separator PDF brochure.

Click to view Stacking Separator PDF Brochure.

Click to view the Mark V Twin Screen Separator Brochure.

(Click to Enlarge)

MK IV Split Screen Separator

Agpro’s^® Mark IV line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Split screen design affords both flexibility in selection of weir spacing and enhanced clean ability. Stainless steel construction includes body, rear entry chamber and screens. All units are provided with hot dip galvanized support structure and two access stairways and under screen spray nozzles to facilitate clean up.

Model Nominal Total Screen Size 7250 6.0' wide x 7.5' long 72135 6.0' wide x 11.2' long 90135 7.5' wide x 11.2' long

MKV Twin Screen Separator

Agpro’s^® Mark V line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Top screen has split screen design to enhance clean ability. Bottom screen is bolted in. All are stainless steel body and rear entry chamber. All units are provided with hot dip galvanized support, two access stairways and bottom screen spray nozzles.

Model Nominal Total Screen Size 72135 6.0' wide x 11.2' long 90135 7.5' wide x 11.2' long

Stacking Separator

The Agpro^® stacking separator is designed to provide up to a 20' stack of reclaimed solids when used in conjunction with our Static Screen Separators. By utilizing this unit tower height mounting of separators is reduced substantially. Additionally, the added length of separating components greatly enhances the overall dryness of the reclaimed solids. Unit comes complete with reception chamber and support system. PARTS OF THE DRIVE PACKAGE ARE HOT DIP GALVANIZED. Desired power requirements ( phase and voltage) must be specified by customer.

Conveyor Separator (Flush)

Agpro’s^® Extractor line of separators is designed to mate with flush operations and provide separation of waste solids without the use of manure pumps, agitators, collection pits or towers. The unit comes with required motors and controls including an automatic on/off switch. Desired power requirements (phase and voltage) must be specified by customer.

Conveyor Separator (Scrape)

Agpro’s^® HS-II Stainless Steel 36" wide Conveyor Separator.  Unibody construction with perforated or wedgewire screen.  Motor & gearbox are euro-style rated for variable speed use.  The unit has integral spray bars under the screen to facilitate cleaning.  Unit has inflow bypass.  Mount frames, catwalk and other minor parts are hot dip galvanized.  Electrical controls are included -Verify phase and voltage.

Individual applications and desired results will dictate screen spacing combinations.

Revolving Drum Separator

The Roto-Dryer line of drum type separators with a 2 hp drive motor is designed for use in either scrape or flush waste removal systems. Units are capable of processing waste with as much as 10% total solids. Manufactured of stainless steel, heavy duty bearings and a unique screen support system for extended service life. Desired power requirements (phase and voltage) must be specified by customer. Controls not included. A Delta Livestock Systems product.

Screw Press Separator

KP Series Screw Press Separator is a machine in which a screw of progressively reducing pitch rotates inside a cylindrical perforated screen. Material entering the hopper is subjected to gradually increasing pressure as it moves toward the exit end of the press, forcing the liquid phase to extrude through the screen. Final pressing is controlled by a discharge door that provides easy adjustment of moisture content. Features stainless steel construction with weld-applied hard surfacing. A graduated pitch and interrupted flight screw prevents jamming, while Class II gearbox selection assures long life. Controls not included.