Agpro’s® Mark IV line of
static screen separator units is designed to separate properly
diluted and agitated liquid waste slurries delivered by pump. Split
screen design affords both flexibility in selection of weir spacing
and enhanced clean ability. Stainless steel construction includes
body, rear entry chamber and screens. All units are provided with
hot dip galvanized support structure and two access stairways and
under screen spray nozzles to facilitate clean up.
MODEL
CAPACITY (GPM)
FLANGED
INLET
FLANGED OUTLET
SHIPPING WEIGHT
FINISH
PART NUMBER
7250
200-500
6”
8”
1300 lbs.
Stainless
852-00-085
72135
300-750
6”
12”
1700 lbs.
Stainless
852-00-083
90135
700-1000
6”
12”
2100 lbs.
Stainless
852-00-081
Individual applications and desired results will dictate screen spacing
combinations.
Model
Nominal Total Screen Size
7250
6.0' wide x 7.5' long
72135
6.0' wide x 11.2' long
90135
7.5' wide x 11.2' long
MKV Twin Screen Separator
Agpro’s® Mark V line of
static screen separator units is designed to separate properly
diluted and agitated liquid waste slurries delivered by pump. Top
screen has split screen design to enhance clean ability. Bottom
screen is bolted in. All are stainless steel body and rear entry
chamber. All units are provided with hot dip galvanized support,
two access stairways and bottom screen spray nozzles.
MODEL
CAPACITY (GPM)
FLANGED
INLET
FLANGED OUTLET
SHIPPING WEIGHT
FINISH
PART NUMBER
72135
150-300
6”
12”
2150 lbs.
Stainless
852-00-096
90135
200-400
6”
12”
2550 lbs.
Stainless
852-00-095
Individual applications and desired results will dictate screen spacing
combinations.
Model
Nominal Total Screen Size
72135
6.0' wide x 11.2' long
90135
7.5' wide x 11.2' long
Stacking Separator
The Agpro® stacking
separator is designed to provide up to a 20' stack of reclaimed
solids when used in conjunction with our Static Screen Separators.
By utilizing this unit tower height mounting of separators is reduced
substantially. Additionally, the added length of separating components
greatly enhances the overall dryness of the reclaimed solids. Unit
comes complete with reception chamber and support system. PARTS
OF THE DRIVE PACKAGE ARE HOT DIP GALVANIZED. Desired power requirements
( phase and voltage) must be specified by customer.
MODEL
Description
HP
SHIPPING WEIGHT
FINISH
PART NUMBER
SS-24
36" wide X 24' long
3
1520 lbs.
Stainless Steel
852-00-100
SS-40
36" wide X 40' long
5
1900 lbs.
Stainless Steel
852-00-092
Conveyor Separator (Flush)
Agpro’s® Extractor line
of separators is designed to mate with flush operations and provide
separation of waste solids without the use of manure pumps, agitators,
collection pits or towers. The unit comes with required motors
and controls including an automatic on/off switch. Desired power
requirements (phase and voltage) must be specified by customer.
MODEL
CAPACITY (GPM)
Nominal Stack Height
Drive PKG
SHIPPING WEIGHT
FINISH
PART NUMBER
24L
100-200
10' to 12'
2 hp
2100 lbs.
Galvanized
852-00-061
Stainless Steel
852-00-062
36
150-300
10' to 12'
2 hp
3300 lbs.
Galvanized
852-00-055
Stainless Steel
852-00-056
36L
200-400
12' to 14'
3 hp
3600 lbs.
Galvanized
852-00-069
Stainless Steel
852-00-070
Individual applications and desired results will dictate screen spacing
combinations.
Conveyor Separator (Scrape)
Agpro’s® HS-II Stainless
Steel 36" wide Conveyor Separator. Unibody construction
with perforated or wedgewire screen. Motor & gearbox
are euro-style rated for variable speed use. The unit has
integral spray bars under the screen to facilitate cleaning. Unit
has inflow bypass. Mount frames, catwalk and other minor
parts are hot dip galvanized. Electrical controls are included
-Verify phase and voltage.
MODEL
CAPACITY (GPM)
SHIPPING WEIGHT
PART NUMBER
HSII-16
Wedgewire
100-200
4500 lbs.
852-00-106
HSII-24
Wedgewire
200-300
5500 lbs.
852-00-107
HSII-16
Perforated
100-200
4400 lbs.
852-00-108
HSII-24
Perforated
200-300
5300 lbs.
852-00-109
Individual applications
and desired results will dictate screen spacing combinations.
Revolving Drum Separator
The Roto-Dryer line of drum type separators with a 2 hp drive
motor is designed for use in either scrape or flush waste removal
systems. Units are capable of processing waste with as much as
10% total solids. Manufactured of stainless steel, heavy duty bearings
and a unique screen support system for extended service life. Desired
power requirements (phase and voltage) must be specified by customer.
Controls not included. A Delta Livestock Systems product.
MODEL
Phase
CAPACITY (GPM)
HP
SHIPPING WEIGHT
PART NUMBER
RD-1
1
150 (scraped manure)
300 (flush manure)
2
1900 lbs.
900-010-010
RD-1
3
150 (scraped manure)
300 (flush manure)
2
1900 lbs.
900-010-030
RD-2
1
75 (scraped manure)
150 (flush manure)
2
1400 lbs.
900-020-010
RD-2
3
75 (scraped manure)
150 (flush manure)
2
1400 lbs.
900-020-030
Individual applications and desired results will dictate screen spacing
combinations.
Screw Press Separator
KP Series Screw Press Separator is a machine in which a screw
of progressively reducing pitch rotates inside a cylindrical perforated
screen. Material entering the hopper is subjected to gradually
increasing pressure as it moves toward the exit end of the press,
forcing the liquid phase to extrude through the screen. Final pressing
is controlled by a discharge door that provides easy adjustment
of moisture content. Features stainless steel construction with
weld-applied hard surfacing. A graduated pitch and interrupted
flight screw prevents jamming, while Class II gearbox selection
assures long life. Controls not included.