Manure Separators by Agpro^®
A full line of separation solutions!

Image 1 - Twin Mark 5 separators and a stacker in a v configuration.
Image 2 - Twin Mark 5 Separators in similar configuration with a stacker.
Image 3 - Dual Separators in side-by-side configuration.

Where there are problems, there are solutions. More stringent regulations and permit requirements make waste management a top concern at dairies and other livestock operations. Agpro^® Inc. is the solution.  From design to installation and service, we have the knowledge and experience to bring you the most complete selection of separation systems.

As regulations get tougher, so do separation systems from Agpro^® Inc.  Our separators are able to remove more solids and phosphorous than ever. No matter what type of bedding, feed or housing conditions are present, separator systems from Agpro^® Inc. can be configured or modified to achieve ultimate performance that will give any inspector or regulator a "clear" idea of your waste management program. 

Agpro^® has a wide range of separating equipment, including ultra-fine double screening or standard single-screen systems, static-screen, conveyor and screw-press designs, models in multiple shapes and sizes to fit existing spaces and specific needs, removable screens and stationary spray nozzles for easy cleaning, stainless steel and hot-dipped galvanized construction. The list goes on.

(Click to Enlarge)

MK IV Split Screen Separator

Agpro’s^® Mark IV line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Split screen design affords both flexibility in selection of weir spacing and enhanced clean ability. Stainless steel construction includes body, rear entry chamber and screens. All units are provided with hot dip galvanized support structure, two access stairways and under screen spray nozzles to facilitate clean up.

Individual applications and desired results will dictate screen spacing combinations.

Model Nominal Total Screen Size 7250 6.0' wide x 7.5' long 72135 6.0' wide x 11.2' long 90135 7.5' wide x 11.2' long

MKV Twin Screen Separator

Agpro’s^® Mark V line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Top screen has split screen design to enhance clean ability. Bottom screen is bolted in. All are stainless steel body and rear entry chamber. All units are provided with hot dip galvanized support, two access stairways and bottom screen spray nozzles.

Individual applications and desired results will dictate screen spacing combinations.

Model Nominal Total Screen Size 72135 6.0' wide x 11.2' long 90135 7.5' wide x 11.2' long

Stacking Separator

The Agpro^® stacking separator is designed to provide up to a 20' stack of reclaimed solids when used in conjunction with our Static Screen Separators. By utilizing this unit tower height mounting of separators is reduced substantially. Additionally, the added length of separating components greatly enhances the overall dryness of the reclaimed solids. Unit comes complete with reception chamber and support system. PARTS OF THE DRIVE PACKAGE ARE HOT DIP GALVANIZED. Desired power requirements ( phase and voltage) must be specified by customer.

Conveyor Separator (Flush)

Agpro’s^® Extractor line of separators is designed to mate with flush operations and provide separation of waste solids without the use of manure pumps, agitators, collection pits or towers. The unit comes with required motors and controls including an automatic on/off switch. Desired power requirements (phase and voltage) must be specified by customer.

Individual applications and desired results will dictate screen spacing combinations.

Conveyor Separator (Scrape)

Agpro’s^® HS-II Stainless Steel 36" wide Conveyor Separator.  Unibody construction with perforated or wedge wire screen.  Motor & gearbox are euro-style rated for variable speed use.  The unit has integral spray bars under the screen to facilitate cleaning.  Unit has inflow bypass and includes a dual roller combination with adjustable tension springs to control bypass.  Mount frames, catwalk and other minor parts are hot dip galvanized.  Electrical controls are included -Verify phase and voltage.

Individual applications and desired results will dictate screen spacing combinations.

Screw Press Separator

The SEPCOM 065 Screw Press Separator is a machine in which a screw of varying pitches rotates inside a cylindrical stainless steel wedge wire screen. Material entering the compensating buffer is subjected to gradually increasing pressure as it moves toward the exit of the press, forcing the liquid to extrude through the screen.

 

Improved Technology

Unlike competitors, SEPCOM uses a patented, self-cleaning technopolymer screw which uses a squeegee action against the screen without causing damage to the screw or the screen. This type of action is not possible with competitors’ metal screws and screens.  SEPCOM also utilizes a technopolymer, self-adjusting back pressure outlet diaphragm to lessen the chance of dropping the plug. This can save downtime by reducing re-starts.

Less Downtime for Maintenance and Repairs

The technopolymer screw also greatly reduces wear when working with sand embedded material. The screw consists of 5 modules which allow the option to replace individual modules instead of the complete screw. The technopolymer, self-adjusting back pressure outlet diaphragm helps reduce downtime by reducing the possibility of needing to perform the restart process after a plug loss.

Download the Full-Length Video Here!