Protimers

FV100 will operate one flush valve using one relay and one input which will allow a remote switch to operate flush valve in a manual mode for preset duration. Timers will be mounted near flush valves.  Each valve can operate up to 12 times per day.  User to program flush time, duration, and days.  Manual flush available.

FV200 will operate two flush valves using one and two relay. Each valve will operate up to 12 times a day.  Timers will be mounted near the flush valves.  User to program flush time, duration, and days to flush.  FV200 timer can be programmed to flush in sequence when external button is pushed.  Manual start and sequenced flush available.

FV400 will operate four flush valves. Each valve will operate up to 12 times.  Timer will be mounted near the flush valves.  User will program flush time duration and days to flush.  FV400 timers can be programmed to flush in sequence when external button is pushed.  Manual flush available.  Manual start and sequenced flush available.

FV800 will operate four eight valves. Each valve will operate up to 12 times.  Timer will be mounted near the flush valves.  User will program flush time duration and days to flush.  FV800 timers can be programmed to flush in sequence when external button is pushed.  Manual flush available.  Manual start and sequenced flush available.

FVP200 for Parlor Flush control. Timer will be mounted near the flush valves.  Designed to conserve water by allowing more control on flush system.  Will operate pair of parlor flush valves using two relays and on external input.  The input will be used to allow a remote switch to operate the parlor flush valves, in an automatic mode for preset duration.  This display will show the time remaining until the lock out period is over.  The user will program the flush duration and lockout time.

FVP400 for Parlor Flush control. Timer will be mounted near the flush valves.  Designed to conserve water by allowing more control on flush system.  Will operate pair of parlor flush valves using two relays and one external input.  The input will be used to allow a remote switch to operate the parlor flush valves, in an automatic mode for preset duration.  This display will show the time remaining until the lock out period is over.  The user will program the flush duration and lockout time.

FS400 will automatically monitor temperature and humidity.  This results in a more efficient use of water and the ability for the controller to adjust amount of cooling based on weather conditions.  The FS400 can be programmed to start fans, set soak time, and set dry time.  Mounts outside in weather tight enclosures.